AEMP Telematics (Association of Equipment Management
Professionals) is an industry standard for retrieving equipment
information.
Equipment tracking applications can be integrated with SRM to
return information on non-bulk equipment by barcode when it is
equipped with the associated AEMP tracking device.
The import of this data back into SRM can be run manually from
Import AEMP Telematics or can be setup to be
run by the Automatic Job Scheduling by
the job AEMP01A.
The Cellutrak 'Plate' number must be assigned as the Telematic ID in the Rental Information window for relevant non-bulk rental products that are equipped with the Cellutrak tracking device.
The AEMP Telematics configuration and credentials can be setup for Cellutrak as follows:
SAM - Samsara:
The Samsara Telematics imports the GEO Location of Longitude
& Latitude and the Meter reading in actual hours of the
relevant equipment back to SRM.
The Samsara 'EquipmentID' must be assigned as the Telematic ID in the Rental Information window for relevant non-bulk rental products that are equipped with the SAM tracking device.
The AEMP Telematics configuration and credentials can be setup for SAM in the following fields:
TRK - Trackunit:
The Trackunit Telematics imports the GPS location and also
meter values by the "CumulativeOperatingHours/Hour" (ISO 8601).
The Trackunit 'SerialNumber' from the 'EquipmentHeader' must be assigned as the Telematic ID in the Rental Information window for relevant non-bulk rental products that are equipped with the Trackunit tracking device.
The AEMP Telematics configuration and credentials can be setup as supplied by Trackunit in the following fields:
ZTR - ZTR Control Systems:
The ZTR Telematics feature currently only passes the
Latitude and Longitude of relevant equipment back to SRM to
identify the location of the equipment.
The ZTR 'EquipmentID' must be assigned as the Telematic ID in the Rental Information window for relevant non-bulk rental products that are equipped with the ZTR tracking device.
The AEMP Telematics configuration and credentials can be setup for ZTR in the following fields:
Meter Usage Billing:
The 'Bill Current Meter' process can be activated in the
Company Billing Parameters to cause the
Cycle Billing to automatically bill up to
the current Meter count logged in the Product
Meter Information for the Rental
Inventory in each billing run.
This process allows updated meter counts captured by
'Telematics' to be automatically included and invoiced in
the standard 'Cycle Billing' run.
When this 'Bill Current Meter' feature is activated then the
more manual Meter Count Sheets billing
processing is disabled.
Contact Texada Services if you would like to integrate with a different Telematic Vendor.
Note: When the Import AEMP Telematics is run manually by SCS staff, an XML report is also generated for debug purposes.
Product Setup & Tracking:
ZTR, Cellutrak, Samsara and Trackunit are the hardware providers
that leverage AEMP standards and supply the tracking devices.
In SRM, the product's corresponding Telematic ID can be set
in the Rental Information window for
relevant non-bulk rental products that are equipped with the
tracking device.
The Texada Web application also utilizes this GEO location tool.
Converted from CHM to HTML with chm2web Pro 2.85 (unicode) |